Wednesday, March 9, 2011

Amylase and a simple enzyme experiment

When it comes to digestion, chewing is the obvious starting point.  Less obvious however are all the enzymes contained within our saliva that also aid digestion.  Enzymes simply put are chemicals that aid the breakdown of substances, or cause a certain chemical reaction to take place.  In the case of saliva, a particular enzyme called Amylase aids the break down or digestion of carbohydrates and starch, turning them into sugars.  Part of the function of chewing is not only to break our food into smaller pieces but also to mix food thoroughly with amylase so our food is digested more efficiently.  We may have consciously experienced the effects of amylase when eating starchy or carbohydrate rich food and notice that the food becomes slightly sweeter after chewing a while.  This sweet taste is a result of amylase breaking down carbohydrates or starch into sweeter tasting sugars. 

We developed a simple lab experiment demonstrating the effects of amylase that anyone can do with some basic equipment.  This is probably an experiment that others have developed, I just haven't come across it before.  All that is needed is a test tube, chlorine free water, saltine crackers, potassium iodide, and spit.  Tap water can be de-chlorinated by letting it set out for 24 hours and potassium iodide (IKI) and test tubes can be purchased on-line. 

Here are the steps to this experiment:
1. Crush up part of a saltine cracker into a fine powder.  You don't need much, only enough to cover the bottom of a test tube.  (this imitates the effects of chewing)
2. Place the crushed cracker in the bottom of a test tube, you only need enough to cover the bottom.
3. Add an equal amount of de-chlorinated water to the test tube and mix thoroughly.
4. Add one or two drops of potassium iodide (IKI) to the water-cracker mix and mix again thoroughly.  At this point much of the cracker should turn a brown color.  This is a result of the IKI staining starches in the cracker brown.
5. Double (or slightly more) the total volume in the test tube with saliva.  Yes, just let some spit accumulate in your mouth and then spit into the test tube.
6.  Mix and wait to see what happens.

Cracker ground up into fine powder.  A small amount like this works best.  Too much cracker makes the experiment work a lot slower.
Cracker with de-chlorinated water added. 
Cracker and water with an added drop of potassium iodide (IKI).  Notice the darker appearance which is the result of IKI staining starch brown.
Saliva added to the above mixture and let sit for about five minutes.  The amylase in the saliva breaks down the starch into sugar.  When the starch disappears the IKI no longer stays brown but instead clears up.  The lighter color indicates the starch has been digested by amylase in the saliva.  By waiting even longer the solution would clear up even more as more starch is digested into sugar.
In the above experiment, as amylase within the saliva breaks down starch into sugar the brown color disappears.  This experiment can be modified to see if heated or cooled saliva will still make the starch disappear.  Chemicals such as vinegar or baking soda could be added, or other foods tested out.

21 comments:

  1. What are the controls in this experiment

    ReplyDelete
  2. Good question. The control would depend on what you are testing. The basic experiment above would be the control for testing pH (by adding baking soda or vinegar) or temperature (by heating or cooling) effects on amylase. If you are testing is if amylase actually breaks down a cracker your control would be simply adding water and no saliva to another test tube as a control. Hope this makes sense, if you have more questions let me know. Sorry it took so long to answer, I've been traveling.

    ReplyDelete
  3. Exact amount of crackers is not extremely important. Do at most 1 part crackers to 1 equal part saliva. More saliva though will help the experiment work quicker.

    ReplyDelete
  4. What is your Hypothesis and problem question?

    ReplyDelete
  5. Both hypothesis and problem depend on what exactly you are testing. If you are testing temperatures effects on amylase than your question is, how does temperature affect the function of amylase? And as some have said, a hypothesis is an "educated guess", so only you can come up with your own "educated guess".

    ReplyDelete
  6. What is the molarity of the Potassium Iodide?

    ReplyDelete
  7. What is the concentration of the IKI?

    ReplyDelete
    Replies
    1. Concentration is about 5%. For some unknown reason though freshness of the IKI can make a big difference changing the required concentration. So you may have to play around with it to determine what concentration gives you the best results. As long as your IKI is a light brownish color though it should work.

      Delete
  8. what could be the limitations in this experiment please?

    ReplyDelete
    Replies
    1. Limitations would either be substrate or enzyme.

      Delete
  9. This comment has been removed by the author.

    ReplyDelete
  10. This comment has been removed by the author.

    ReplyDelete
  11. wich temperature amilayse work better?

    ReplyDelete
  12. This comment has been removed by the author.

    ReplyDelete
  13. What is your Hypothesis

    ReplyDelete
  14. what is the substrate and product of the project?

    ReplyDelete
  15. In ths lab, what actually denatured the carbohydrate in the cracker?

    ReplyDelete
  16. What are the independent and dependent variables if you are testing the amylase?

    ReplyDelete
  17. what actually are the independent and dependent variable when you are testing the amylase
    am trying to figure out but I can't

    ReplyDelete
  18. Thanks for the information. I really like the way you express complex topics in lucid way. It really helps me understand it much better way. alpha amylase powder

    ReplyDelete